TM 5-3610-295-13&P-2
3-3. GENERAL. - Continued
Table 3-1. Operator Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. DUPLICATING MACHINE DOES NOT START .
Step 1. Check to see if the plug is out of wall receptacle.
Plug into wall receptacle.
Step 2. Check to see if a safety interlock switch is open.
Be sure all interlocked covers and door are latched.
Refer to TM 5-3610-298-12&P.
Step 3. Check to see if a safeguard cover is out of place.
Reposition all safeguard covers.
Refer to TM 5-3610-298-12&P.
4. IMAGE ON MASTER WEARING OR BREAKING DOWN .
Check to see if the form roller-to-master or master-to-blanket pressure is too heavy.
Set pressure correctly in accordance with TM 5-3610-298-12&P.
5. DUPLICATION MATERIAL PASSING FROM DUPLICATING MACHINE AT TOO
GREAT A RATE FOR RECEDING STACKER.
Check that stacker paper truck lowering speed corresponds to the raising speed of the paper feeder
magazine.
Adjust paper truck lowering speed in accordance with TM 5-3610-298-12&P.
6. DUPLICATING MACHINE NOT PRODUCING GOOD COPY.
Check for incorrect impression-to-blanket cylinders adjustment.
Adjust cylinder pressure in accordance with TM 5-3610-298-12&P.
3-5
