TM 5-3610-295-13&P-2
SECTION II. TROUBLESHOOTING PROCEDURES
3-3. GENERAL.
a. If you suspect a problem, you should first verify that the PRESTART PROCEDURE in paragraph 2-8 has
been performed before continuing with OPERATOR TROUBLESHOOTING in table 3-1.
b. The common malfunctions which you may encounter during operation or maintenance of the components of
the press shelter are listed in table 3-1, OPERATOR TROUBLESHOOTING. You should perform the tests, inspections,
and corrective actions in the order listed.
c. This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions
possible. If a malfunction is not listed or is not corrected by listed corrective actions in this manual, refer to the
appropriate commercial or Technical Manual. If at this point you cannot correct the malfunction, notify your supervisor.
d. Refer to table 3-1 for troubleshooting information and procedures applicable to the press shelter system and
components. Any trouble the operating crew is not authorized to correct should be reported to the maintenance category
indicated in the Maintenance Allocation Chart (MAC).
WARNING
DEATH or serious injury could result if electrical
precautions
are
not
taken
when
maintaining
this
equipment.
Be
sure
that
power
cables
are
unplugged/disconnected, that circuit breakers are set to
OFF, and that cables are unplugged/disconnected. Be sure
the equipment is properly grounded. Always have another
person standing by who is familiar with electrical shock
first aid.
3-3
