TM 5-3610-295-13&P-1
4-29.
PHOTOTYPESETTER ASSEMBLY. - Continued
b. Replace Digital Slave Typesetter. - Continued (See Figure 4-32.)
(9) Lay replacement digital slave typesetter(10) on side and install spacers (22), casters (21), flat washers (20),
lockwashers (19), and bolts (18).
(10) Install upper support bracket assembly (9), flat washers (17), lockwashers (16), and screws (15).
(11) Install communications cable (14) and raise digital slave typesetter to standing position.
(12) Align holes in upper support bracket (9) with holes (12) in bottom bracket (13) and install screws (11).
(13) Slide digital slave typesetter (10) into position and install flat washer (7) and thumbscrew (8).
(14) Raise top (2) and install backing plate (6), flat washers (5), lockwashers (4), and bolts (3).
(15) Connect power cord (1).
4-82
