TM 5-3610-294-13&P
4-18. OFFICE CABINET ASSEMBLY. - Continued
(1)
Using control knob (3) on transporter assembly (2), lower office cabinet assembly to floor of shelter.
(2)
Remove contents and lay office cabinet on back.
(3)
Open door (4) and remove bottom drawer (5).
(4)
Remove nuts (6), lockwashers (7), flat washers (8), stiffener plates (9), and bolts (10) securing
transporter assembly to office cabinet assembly and remove transporter assembly.
NOTE
It will be necessary to drill holes from transporter assembly in the office cabinet when
replacing the office cabinet.
(5)
Position replacement transporter assembly with replacement office cabinet assembly and secure with
bolts (10), stiffener plates (9), flat washers (8), lockwashers (7) and nuts (6).
4-19. PAPER STORAGE RACK ASSEMBLY. Refer to figure 4-15 for location of components and hardware of the
paper storage rack assembly. The maintenance procedure for the paper storage rack assembly with light table, ISO jack
storage, and table storage is the I same.
This task covers: Repair
INITIAL SETUP
Tools
General Mechanics Automotive Tool Kit, Appendix B
Materials
None
Change 1 4-41
