TM 5-3610-293-13&P
3-5.
GENERAL. - Continued
Table 3-1. Operator Troubleshooting - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 4. Verify that AC dampers are open.
Open AC dampers.
Step 5. If steps 1 through 4 above are okay, refer to air conditioner technical manuals (TM 5-4120-395-14&P for
the 24,000 BTUH AC or TM 5-4120-396-14&P for the 36,000 BTUH AC) for additional trouble-shooting procedures.
4. PRINTING PRESS FAILS TO OPERATE.
Step 1. Check power distribution panel circuit breakers to make sure they are on.
Turn on power distribution panel circuit breakers.
Step 2. Refer to the printing press operation manual (TM 5-3610-304-10) to make sure printing press is set up f
or operation.
Setup printing press for correct operation.
5. CARGO DOOR VENT ASSEMBLY DOES NOT OPERATE PROPERLY.
Step 1. Check vent doors (4 ea) for proper opening and closing.
Lubricate hinges.
Step 2. Check vent assembly switches for proper operation.
Notify unit maintenance of trouble.
Step 3. Check vent doors for dents or bends and for loose or missing hardware.
Notify unit maintenance of trouble.
3-7
