TM 5-3610-293-13&P
SECTION II. OPERATOR TROUBLESHOOTING PROCEDURES
3-5. GENERAL.
a.
This section contains troubleshooting information for locating and correcting most malfunctions of the Press
Section. Each malfunction for an individual component or unit is followed by a list of tests or inspections which will help
you to determine corrective actions in order listed.
b.
This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions. If a
malfunction is not listed, or is not corrected by listed corrective actions, notify your supervisor.
c.
Table 3-1 lists the common malfunctions which you may find during operation of the Press Section or its
components. You should perform tests or inspections and corrective actions in the order listed.
d.
Refer to paragraphs 3-1 through 3-4 for lubrication instructions.
WARNING
High voltage exists in the electrical components of this equipment. DEATH on
contact may result if personnel fail to observe safety precautions.
NOTE
If you suspect a problem, you should first verify that the start-up procedures have
been properly performed before continuing with troubleshooting.
3-5
