TM 5-3610-293-13&P
4-22. SINK ASSEMBLY. - Continued
WARNING
Disconnect power to the sink assembly before opening rear door. DEATH on
contact may result if power is not disconnected.
(1)
Open rear door (1).
(2)
Tag and disconnect terminal wires (2) attached to power supply (3).
(3)
Remove screws (4) holding power supply (3) in place.
(4)
Remove power supply (3).
(5)
Place new power supply (3) in position.
(6)
Apply RTV sealing compound to seal screws (4).
(7)
Install screws (4) holding power supply (3) in place.
(8)
Connect terminal wires (2) and remove tags.
(9)
Close rear door (1).
(10)
Turn power on and test operation.
4-60
