TM 5-3610-293-13&P
4-22. SINK ASSEMBLY. - Continued
(1) Drain fresh water tank (1) and grey water tank (2). Refer to paragraph 2-14.
WARNING
Disconnect power to the sink assembly before opening rear door. DEATH on
contact may result if power is not disconnected.
(2)
Open rear door (3).
(3)
Remove clamps (4) and hoses (5).
(4)
Remove screws (6), flat washers (7), lockwashers (8), and nuts (9) holding fresh water pump in
place.
(5)
Tag and disconnect electrical wires (10).
(6)
Remove elbow fitting (11).
(7)
Remove pump (12).
(8)
Place new pump (12) in position.
(9)
Install elbow fitting (11) and electrical wires (10) and remove tags.
(10)
Secure pump with screws (6), flat washers (7), lockwashers (8), and nuts (9).
(11)
Attach and tighten clamps (4) and hoses (5).
(12)
Close rear door (3).
4-53