4-20. WALL MOUNTED STORAGE CABINET

Figure 4-16. Wall Mounted Storage Cabinet

TM-5-3610-293-13P Modular Printing System (MPS) Module B Press Section of the Army Special Warfare Modular Printing System Manual
Page Navigation
117

TM 5-3610-293-13&P 4-19. GTO CABINET ASSEMBLY. - Continued a. Tighten or replace loose or missing bolts, nuts or washers on GTO cabinet assembly (1). b. Tighten or replace loose or missing bolts, nuts or washers on GTO cabinet assembly transporter assembly (2) c. Repair by replacing transporter assembly. (1) Using control knob (3) on transporter assembly, lower GTO cabinet assembly to floor of shelter. (2) Unload and remove bottom drawer. (3) Remove nuts (4), lockwashers (5), flat washers (6), plate stiffeners (7), and bolts (8) securing transporter assembly to GTO assembly and remove transporter assembly. (4) Align holes in replacement transporter assembly with holes in GTO cabinet assembly and secure in place with nuts (4), lockwashers (5), flat washers (6), plate stiffeners (7), and bolts (8). 4-20. WALL MOUNTED STORAGE CABINET. Refer to figure 4-16 for location of components and hardware of the storage cabinet. This task covers: Replace INITIAL SETUP Tools General Mechanics Automotive Tool Kit, Appendix B Materials None 4-46

Privacy Statement
Press Release
Contact