TM 11-7025-232-10
2-15. SELF-TEST/OPERATE LINE PRINTER (CONT)
NOTE
I n some installations printer must
be pulled away from wall before
acoustic cabinet rear doors can be
opened. See your system manual for
a c c e s s instructions.
28. Open acousti c cabinet rear doors.
29. Check print density on back copy of
paper.
print i s t o o l i g h t , o p e n
If
operator door and turn COPIES
c o n t r o l knob clockwise
If
print is too dark, open
operator door and turn COPIES
c o n t r o l knob counterclockwise
If
print
density
is
satisfactory
open operator door, and go to
step 31
30. Repeat steps 24-29 as required to
o b t a i n desired print density, then
go to step 31.
31. Set TEST switch to center (OFF)
position.
32. Close operator door.
NOTE
I n some installations printer, must
be pushed back against wall after
a c o u s t i c cabinet rear doors are
c l o s e d . See your system manual.
33. C l o s e acoustic cabinet rear doors.
34. Press ON/OFF LINE switch to set
p r i n t e r o n l i n e . Make sure ON/OFF
LINE indicator is lit.
35. W h e n printing operation is completed,
power OFF printer (para 2-7).
2-37
