TM 11-7025-232-10
2-15. SELF-TEST/OPERATE LINE PRINTER (CONT)
1 2 . Allow 10 or 12 lines of the sliding
p a t t e r n to be printed, then press
ON/OFF LINE switch to stop print.
13. Open operator door and check
printout.
I f characters or lines
a r e missing, tell your supervisor
maintenance is required.
1 4 . Set TEST switch to full left
position.
15. Close operator door.
16. Press ON/OFF LINE switch to start
print.
17. Allow 10 or 12 lines of the fixed
p a t t e r n to be printed. Then press
ON/OFF LINE switch to stop-print.
18. Open operator door.
,
1 9 . Check if character printout appears
as shown.
If adjustments
are
needed,
do
steps 20-21
If not, go to step 22
