TM 11-7025-232-10
Vertical
Adjust
Knob.
Used to adjust paper top of form
Moves up and down to free or lock vertical adjust
Paper Release Lever.
k n o b in position
Paper
Puller
Pressure
Rollers. Can be positioned to create tension on
paper as it is pulled across hammer bank assembly
b. E l e c t r o n i c Controls. T h e following electronic controls are used to prepare
a n d place the printer in on-line or off-line operation:
POWER ON/OFF Switch.
Turns printer on and off
Vertical Format Unit. U s e s operator-installed optical tape to advance
p a p e r to top of form and to desired line positions within a form
Tape Read Request Switch. When pressed (fig. 2-1), VFU tape revolves
through tape reader head which reads holes punched in tape
Control Panel. Contains switches and indicators used to operate the line
p r i n t e r . P a r t of the control panel is visible (fig. 2-2) and part is
h i d d e n under the operator door (fig. 2-3). To access these hidden
controls you must open the operator door. These controls should not be
u s e d while printer is operating on line under system control
VFU Tape Read Request Switch
