TM 11-7025-210-10
3-7. CLEAN TYPE FINGERS
INITIAL SETUP
Common tools
Supplies
Typewriter brush
3X5 in. card or punch card
1. Power OFF.
2. Open cover.
3. Remove paper (para 2-11).
4. Remove re-inker (para 3-6).
5. Remove ribbon cartridge (para 3-5).
6. Place a punch card between the print belt and the type
fingers.
CAUTION
To clean type fingers, brush upward
only. Brushing any other way could
bend/destroy fingers.
7. Brush keys with typewriter brush.
8. To locate and clean the next set of type fingers, rotate
motor pulley counterclockwise.
9. Clean all type fingers.
10. Remove punch card.
11. Replace ribbon cartridge (para 3-5).
12. Replace re-inker (para 3-6).
13. Install paper (para 2-11).
14. Close cover.
15. Power ON
3-9/(3-10 blank)
