TM 11-6780-225-35
(6) Remove plate (19), nut (20), and lockwasher
(73) with screws (74), washers (75), screws (76), and
(21).
washers (77).
(7) Disassemble thermostat (22) from holder
(5) Install washers (72), screws (71), washers
(23) by removing nut (24).
(69) and (70), screws (68), nuts (67), washers (65) and
(8) Remove heating element (25) and box (26)
(66), screws (64), washers (63), screws (62), washers
by removing screws (25A). Remove connector (27) from
(61), screws (60), washers (59), screws (58), washers
tank (28).
(57), and screws (56).
(9) Remove screw (29), washers (30) and (31),
(6) Install shelf (55) with nuts (54), washers (52)
nuts (32), and cover (23).
and (53), screws (51), washers (50), screws (49),
(10) Remove screws (34), washers (35) and
washers (48), and screws (47).
(36), and nuts (37). Remove screws (38), washers (39),
(7) Install film drop (46) with clamp (45).
plate (40), washers (41) and (42), nuts (43), and diffusion
(8) Install diffusion transfer equipment storage
transfer equipment storage box (44).
box (44) with nuts (43), washers (41) and (42), plate
(11) Remove clamp (45) and film drop (46).
(40), washers (39), and screws (38).
(12) Remove screws (47), washers (48), screws
Install nuts (37), washers (35) and (36), and screws (34).
(49), washers (50), screws (51), washers (52) and (53),
(9) Install cover (23) with nuts (32), washers (30)
nuts (54), and shelf (55).
and (31), and screws (29).
(13) Remove screws (56), washers (57), screws
(10) Install connector (27) onto tank (28).
(58), washers (59), screws (60), washers (61), screws
Install box (26) and heating element (25) with screws
(62), washers (63), screws (64), washers (65) and (66),
(25A).
nuts (67), screws (68), washers (69) and (70), screws
(11) Install thermostat (22) to holder (23) with nut
(71), and washers (72).
(24).
(14) Remove plate (73), screws (74), washers
(12) Install lockwasher (21), nut (20), and plate
(75), screws (76), washers (77), and processing sink
(19).
(78).
(13) Install relay (18) with nuts (17) and screws
(15) Remove screws (79), screws (80), shock
(19).
mounts (81) and (82), plates (83) and (84), and control
(14) Install knob (15) with screw (14A).
unit (85).
(14) Install plate (14). Install socket (13) and
(16) Remove screws (86) and (87), washers
lampholder (10) with nut (11) and lockwasher (12).
(88), water pump (89), right support (90), and left support
Install lamp (9) and jewel (8).
(91).
(16) Install switch (5) and plate (7) with screws
(17) Remove screws (92) and expansion and
(6). Connect all wiring according to tag references and
water tank (93).
wiring diagram (fig. 51).
(17) Install knob (4) with screw (3). Install
b.
Cleaning and Inspection.
screws (1) and nuts (2).
(1) Remove all grease and dirt with a lint free
3-13.
Water System Repair
cloth moistened with cleaning compound.
(fig. 33)
(2) Inspect for any damage that will prevent
effective use of the equipment and replace all damaged
a.
Typical Disassembly of Compression Tube
components.
Fittings (Insert A). The disassembly of compression tube
fittings is performed using open end wrenches of
c. Assembly.
required size as follows:
(1) Place wrench on fitting (5) to prevent rotation.
(1) Install expansion and water tank (93) with
(2) Place a second wrench on nut (2) and exert
screws (92).
force in counterclockwise direction while holding other
(2) Install left support (91), right support (90),
wrench on fitting (5) firm.
and water pump (89) with screws (86) and (87), and
(3) Remove nut (2) and attaching parts (3) and
washers (88).
(4) from tubing (1).
(3) Install control unit (85), plates (83) and (84),
and shock mounts (81) and (82) with screws (86) and
(87).
(4) Install processing sink (78) and plate
3-7
