TM 11-6730-235-12
Table 1-1.
Expendable Consumable Supplies and Material
The supplies and material listed in this table are required for operation of this equipment and are authorized to be
requisitioned by SB 700-50. The FSN for the applicable unit of issue required can be found in appropriate supply
catalogs. The FSCM is used a element in item identification to designate manufacturer or distributor or Government
agency, etc., and is identified in SB 708-42.
Ref. No.
Item
Description
And FSCM
FSC
1
Roll, Acetate: 100 feet,
615-6, 31535
6730
10.25 inches
(2) Roll attachments. The roll attachments are
terminated in a lug that is connected to the mounting
screw of a convenience outlet switch plate in use.
mounted on either the left and right or front and back
sides of the case assembly, and provide for storage and
takeup of acetate rolls. These rolls move either from
b. Description of Minor Components.
The minor
side-to-side or from front-to-back on the projector top
component of the projector set consists of two acetate
ate assembly in accordance with the points of mounting.
rolls, five packages of lens tissue, and a carrying case.
(3) Adapter. The adapter a line cord plug adapter
The acetate rolls (fig. 1-1) are used with the roll
t hat permits the polarized plug of the line cord to be
attachments, one at a time. Each acetate roll is a 100-
used with a two hole power source convenience outlet
foot roll wound around a cardboard spool. The lens
One end, therefore, contains three line plug pins; the
tissue packages each contain 100 sheets of 3- by inch
other end, two convenience outlet-like sockets.
A
lens tissue paper. The carrying case is a vinyl bag that
grounding wire extends from the plastic shell of the
holds the other items of the projector set when they are
adapter. This wire is
not in use.
Change 1 1-2.1