Paragraph 9 (page 5 of C2). Delete paragraph 9 and substitute:
9. Differences in Models
None
Located at top of
Formed by left shelf_ _ _ _ _
Housing cover_ _ _ _ _ _ _
Formed by left shelf
housing, rear hinged.
(Raises to 45 angle.)
Fixed _ _ _ _ _ _ _ _ _ _ _ _ _
Fixed _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Fixed _ _ _ _ _ _ _ _ _ _ _ __
Raises to 90.
Projection stage _ _ _ _ _ __ _ _ _
Captive screws on
Captive screws on
Aperture plateholder
Captive screws on
Knurled projection-stage
holder.
housing.
mounting device.
housing.
retaining screws at rear
of projection stage.
Integral, front and rear.
Separate, side mounting-.
Roll attachment_ _ _ _ _ _ _ _
Separate, side mounting
Integral, front and rear.
Three-wire, attached at
Two-wire, detachable. _ _ _
Two-wire, detachable- _ _ _
Power cord_ _ _ _ _ _ _ _ _
Three-wire, attached at
projector.
projector.
Shelves
Drop-leaf, side; front is
Drop-leaf, front; raised-
Drop-leaf, front and
Drop-leaf, front; raised-
part of housing cover.
leaf side.
side.
leaf side.
On housing _ _ _ _ _ _ _ _ _ _
Pencil groove location_ _ _ _ _ _
On front shelf- _ _ _ _ _ _ _ _
On housing cover _ _ _ _ _ _ _
Formed when front shelf
is raised.
Hole in right rear top- _ _ _ _
Hole in right rear top--
Head-support post
Hole in right rear top _ _ _
Center holes in yoke.
mounting location.
Right side, rear _ _ _ _ _ _ _ _ _ _
Right side, rear_ _ _ _ _ _
Clamping knob location.
Right side, rear. _ _ _ _ _ _
Rear of yoke plate.
There screws_ _ _ _ _ _
Three screws_ _ _ _ _ _ _ _ _ _ _
Projection lens mount-
Three screws-----------
Retaining ring.
ing.