TM 10-3610-203-14
Section XVIII. MAINTENANCE OF LEVEL INDICATOR GAGE
4-38. General
Two recessed level indicator assemblies are in6talled on the shelter. One gage is installed on the outside rear wall of
the shelter to the left of the shelter door. The second is installed on the outer left wall of the shelter. The indicators are
used to level the shelter during installation on uneven terrain.
4-39. Level Indicator Gage
a.
Inspection.
(1)
Inspect the level gages for secure mounting, broken or cracked sight glass.
(2)
Inspect for correct level indication by placing several levels in various locations and positions on the
shelter floor and compare the headings with those of the shelter levels.
(3)
Remove and repair as required. If replacement of the entire assembly is necessary, notify direct and
general support maintenance.
b.
Removal. Remove the two mounting screws and nuts that secure the gage to the mounting bracket and remove
the gage. (See fig. 4-21).
Figure 4-21. Level Indicator Gage, Removal and Installation.
4-43
