TM 10-3610-203-14
Table 4-1. Organizational Preventive Maintenance Checks and Services - Cont
Legend
W - Weekly
Q - Quarterly
A - Annually
H - Hours
M - Monthly
S - Semiannually
B - Biennially
MI - Miles
For Readiness
Interval
Reporting.
Item
W
M
Q
S
A
B
H
MI
Item To Be
Equipment is Not
No.
Inspected
Procedures
Ready/Available If:
4
Papercutter Assembly
Inspect for worn, cracked
- Cont
or frayed hydraulic pump
drive belt in accordance
with the applicable technical
manual.
Inspect hydraulic oil level
and system components in
accordance with applicable
technical manual.
Report any damage to direct
support maintenance.
5
Water Supply Plumbing
Inspect valves, faucet, liner
and fittings for damage which
could cause leaks. If inspec-
tion indicates that replacement
of plumbing components is
necessary, refer to paragraph
4-27.
6
Fire Extinguisher
Inspect nozzle and adapter
assembly for security and
condition. Weigh cylinder
every six months and replace
if gross weight has decreased
by six ounces or more.
If inspection indicates that
replacement of the fire
extinguisher is necessary,
refer to paragraph 4-33.
7
First Aid Kit
Inspect first aid kit for
security and for condition of
contents. If inspection indi-
cates that replacement of the
first aid kit is necessary,
refer to paragraph 4-35.
8
Shelter Door Filter
Inspect for cleanliness,
damage and proper installa-
tion. If necessary, clean
filter as follows:
Open the hinged exterior
weather cover by releasing
the fasteners. Secure the
cover in the open position
by means of the bracket-
hinged retaining rod.
4-10
