6. Marking: defects as
(7) Inspect for corrosion dirt, moisture, and
fungus.
-
STD-252B.
7. Parts: defects as listed in
(8) Inspect all parts and hardware for dam-
-252B.
age and condition.
8. Contacts: defects as listed in MIL-
(9) Inspect assembly for physical damage,
STD-252B.
condition, missing parts, foreign objects, and
(2) Electrical.
finish.
(a) Critical. Refer to the definition of a
d. Test Requirements.
Perform those tests
critical defect as specified in 3e. above.
that are specified for each camera set listed in
(b) Major.
My electrical defect, other
appendix B.
than critical that doe, not meet the requirements
e. Defect Classification.
specified for each item shall be considered a ma-
jor defect.
(1) Mechanical- Visual.
All electrical defects
(c) Minor. None.
(a) Critical. Refer to the definition of a
shall be considered critical or major, as applic-
critical defect as specified in 3 e. above.
able.
(b) Major.
(3) Packaging and marking, major.
1. Damage due to handling or storage
(a) Use of improper or defective material.
(crushed, deformed, or broken).
(b) Quantity in unit package not as speci-
2 S o l d e r i n g : defects as listed in MIL-
fied.
STD-252B.
(c) Incorrect packaging method applied.
defects as
3.
Solderless connectors:
listed in MIL-STD-252B.
(e) Cushioning or padding inadequate for
4. Cabling and wiring: defects as listed
the protection of the barrier material from pro-
in MIL-STD-252B.
jections, sharp edges, or other similar features of
5. Fastening hardware and assembly:
the item.
defects as listed in MIL-STD-252B.
(f) Cushioning inadequate or the physical
6. Foreign objects: defects as listed in
and mechanical protection of the item.
MIL-STD-252B.
(g) Unsealed, punctured, or improperly
7. Potential short circuits: defects as
sealed barrier bag, wrap, or envelope.
listed in MIL-STD-252B.
(h) Stock number omitted, Incorrect, or
8. Finish: defects as listed in MIL-STD
-252B.
illegible.
(i) Nomenclature omitted, incorrect, or
9
defects as listed in
Marking:
illegible.
MIL-STD-252B.
(j) Marking of quantity of items an pack-
defects as listed in
Parts:
incorrect, or illegible.
MIL-STD-252B.
11. Contacts: defects as listed in MIL-
STD-252B.
12. Plating: painting, or MFP missing.
a dimensional defect
6
