TM 5-3610-295-13&P-2
4-21. AIR CONDITIONER ASSEMBLY. - Continued
b.
Replace Air Conditioner. - Continued
(15)
Drill out rivets (10) and remove cover latches (11) from old air conditioner (2).
(16)
Remove screws (12) from old air conditioner (1).
(17)
Remove screws (13), flat washers (14), and canvas cover (15) from replacement air conditioner
(1).
(18)
Drill out rivets (16) and remove front handles (17) from replacement air conditioner (2).
(19)
Position cover (18) on replacement air conditioner (1). Locate cover latch positions and drill
mounting holes. Install cover latches (11) on replacement air conditioner with rivets (10).
(20)
Install canvas cover (15), flat washers (14), and screws (13) on old air conditioner (1).
(21)
Install screws (12) on replacement air conditioner (1).
(22)
Chisel off rivets (19) and remove data plates (20), (21), and (22) from replacement air
conditioner (1) and relocate to positions (23), (24) and (25) shown in Figure 4-16 and install with rivets (26).
(23)
Install rivets (14) in old data plate mounting holes on replacement air conditioner (1).
(24)
Apply RTV sealant (Appendix E, item 2) to handle covers (8) and install on replacement air
conditioner (1) with rivets (7).
(25)
Slide collar (6) onto front of replacement air conditioner (1) and position 3-3/8 inches from the
front as shown in Figure 4-16.
CAUTION
When drilling holes in air conditioner, care MUST be taken not to damage condenser or evaporator
coils or wiring.
(26)
Drill two 1/2 inch holes on each side, top, and bottom of replacement air conditioner (1) using
collar (6) as a template.
4-44
