TM 5-3610-295-13&P-2
4-34. TELEPHONE BRACKET ASSEMBLY. - Continued
a.
Inspect. (See Figure 4-31.)
Check telephone bracket for completeness and security of mounting.
b.
Replace. (See Figure 4-31.)
(1)
Remove wingnut (1), lockwasher (2), flat washer (3), and bracket (4) from telephone bracket (5).
(2)
Remove screw (6), rubber backing (7), and plate (8).
(3)
Remove screws (9) and bracket (5).
(4)
If necessary, remove rubber padding (10 and 11).
(5)
If removed, install rubber padding (10 and 11) by gluing to brackets (5 and 4).
(6)
Install screws (9) and bracket (5).
(7)
Install plate (8), rubber backing (7) and screw (6).
(8)
Install bracket (4), flat washer (3), lockwasher (2), and wingnut (1).
c.
Repair. (See Figure 4-31.)
Repair of the telephone bracket assembly consists of replacing damaged or missing components.
Refer to paragraph b. above.
4-77
