TM 5-3610-295-13&P-2
4-28. TELEPHONE BINDING POST ASSEMBLY. - Continued
c.
Repair. (See Figure 4-24.)
Repair of the telephone binding post assembly consists of replacement of binding posts. Refer to
paragraph b. above.
4-29. LEVEL INDICATOR ASSEMBLY.
This task covers:
a. Inspect
b. Replace
c. Repair
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a.
Inspect.
Check level indicator assembly on outer roadside wall and outer rear wall for breakage, completeness,
and security.
b.
Replace. (See Figure 4-25.)
(1)
Remove screws (1), and lockwashers (2) from receptacle frame. Removal procedures are identical for
both assemblies.
(2)
Remove nuts (3), lockwashers (4), flat washers (5), screws (6), and level (7) from bracket (8).
(3)
Remove rivets (9) from receptacle frame (10) by drilling or chiseling off heads.
(4)
Remove RTV sealant and receptacle frame (10) from shelter wall.
4-64
