TM 5-3610-295-13&P-1
4-15. ARTIST SUPPLY CABINET ASSEMBLY. - Continued
a. Inspect. (See Figure 4-7.)
(1)
Check editorial room, curbside supply cabinet for security of mounting. Check for dents and
structural damage. Inspect welds for breaks or separation.
(2)
Check supply cabinet handles for security of installation and damage.
(3)
Check latching mechanism for proper operation and security.
b. Replace. (See Figure 4-7.)
(1)
Remove contents from supply cabinet shelves.
(2)
Remove bolts (2), flat washers (3), backing plates (4), lockwashers (5), nuts (6), and cabinet (1).
(3)
Install supply cabinet (1). Secure with bolts (2), flat washers (3), backing plates (4), flat washers (5),
lockwashers (6), and nuts (7). Seal backing plates (4) to shelter wall with RTV (Appendix E, item 3).
c. Repair. (See Figure 4-7.)
(1)
Replace door handle assembly.
(a)
Remove door handle assembly (8) by removing nuts (9) and retainer plate (10).
(b)
Remove rods (11) and backing plate (12).
(c)
Remove bolts (13), star washers (14), and door handle assembly (8).
(d)
Install replacement door handle assembly (8) and secure with star washers (14), and bolts
(13).
(e)
Install backing plate (12), rods (11), retainer plate (10), and secure with nuts (9).
(2)
Remove minor dents and bends from supply cabinet (1) body.
(3)
Remove minor dents and bends from supply cabinet (1) shelf.
(4)
Repair welds as needed.
4-34
