TM 5-3610-295-13&P-1
4-14. LIGHT TABLE ASSEMBLY. - Continued
c. Repair. (See Figure 4-5.)
(1)
Remove light table glass (1) and plastic top (2).
(2)
Grasp fluorescent tube (3), rotate 900, and remove from table tube sockets.
(3)
Rotate starter (4) counterclockwise and remove from socket.
(4)
Remove nuts (5).
(5)
Remove wire nuts (6).
(6)
Remove ballast (7).
(7)
Remove nut (8), plate (9), wire nuts (10), and switch (11).
(8)
Remove screw (12), flat washer (13), and nut (14).
(9)
Remove power cord (15).
NOTE
The following modification procedure, steps 10 and 11, is for modifying a light
table that has not been modified for this shelter. (See Figure 4-6. )
(10)
Measure and drill light table shipping bracket mounting holes (1).
(11)
Tap drilled holes.
(12)
Install light table power cord (15). (See Figure 4-5.)
4-30
