TM 5-3610-295-13&P-1
4-39. LEVEL INDICATOR ASSEMBLY.
This task covers:
a. Inspect
b. Replace
c. Repair
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a. Inspect.
Check level indicator assembly on outer roadside wall and outer rear wall for breakage, completeness, and
security.
b. Replace. (See Figure 4-50.)
(1) Remove screws (1), and lockwashers (2) from receptacle frame (10). Removal procedures are identical
for both assemblies.
(2) Remove nuts (3), lockwashers (4), flat washers (5), screws (6), and level (7) from bracket (8).
(3) Remove rivets (9) from receptacle frame (10) by drilling or chiseling off heads.
(4) Remove RTV sealant and receptacle frame (10) from shelter wall.
4-116
