TM 5-3610-295-13&P-1
4-22. RUB-UP BOARD AND MOUNTING ASSEMBLY. - Continued
a. Inspect. (See Figure 4-18.)
(1)
Remove rub-up board (1). Inspect strap assembly webbing (2) for wear, frayed sewing, and decayed
fabric.
(2)
Inspect fastener loops (3) for secure mounting to wall.
(3)
Remove board assembly. Inspect for burrs, sharp edges, and signs of rust or excessive dirt. Check
for dents or cracks.
(4)
Inspect rubber pad for damage and security.
b. Replace. (See Figure 4-18.)
(1)
Remove fastener loop screws (4).
(2)
Remove fastener loops (3) and strap assembly (2).
(3)
Install fastener loops (3) into loops of strap assembly (2).
(4)
Install and secure fastener loops (3) to wall partition with screws (4).
(5)
Install and secure rub-up storage board (1) to wall with strap assembly (2).
c. Repair. (See Figure 4-19.)
(1)
Remove dents in rub-up board (2) with hammer.
(2)
Remove burrs from rub-up board (2).
4-54
