TM 5-3610-295-13&P-1
4-19. SAFELIGHT ASSEMBLY.
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General mechanics automotive tool kit, Hand blind rivet
Materials
None
a. Inspect. (See Figure 4-12.)
(1)
Check light fixture's fluorescent tubes for discoloration, inadequate illumination, and failure.
(2)
Check tube socket for security and damage.
(3)
Check light fixture for damage and incorrect attachment.
b. Replace. (See Figure 4-12.)
WARNING
DEATH or serious injury could result if electrical precautions
are not taken when maintaining this equipment. Be sure
that power cables are unplugged/ disconnected, that circuit
breakers are set to OFF, and that generator cables are
unplugged/disconnected. Be sure the equipment is properly
grounded. Always have another person standing by who is
familiar with electrical shock first aid.
(1)
Place lights circuit breaker on power distribution panel in OFF position.
(2)
Rotate light fixture assembly lamp (1) 900 and remove.
(3)
Rotate lock (2) 900 and remove cover (3).
(4)
Remove wire nuts (4).
4-44
