TM 5-3610-295-13&P-1
4-18. V ERTICAL CAMERA AND MOUNTING ASSEMBLY.
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a. Inspect. (See Figure 4-10.)
Check vertical camera for completeness and security. (Refer to TM 5-3610-303-12&P.)
b. Replace. (See Figure 4-10.)
(1)
Vertical camera. (See Figure 4-10.)
NOTE
lifting and removing camera requires two or more persons.
(a)
Disconnect camera power cord (1) and light bar power cord (2).
(b)
Disconnect vacuum pump power cord (3) and vacuum hose (4).
(c)
Remove upper shock mount bolts (5) and nuts (6) from roadside wall.
(d)
Remove floor shock mount bolts (7) and nuts (8).
(e)
Lift camera (9) forward, rotate 900, and rest on shelter floor.
(f)
Remove floor mounting bracket bolts (10), lockwashers (11), flat washers (12),
and floor mounting bracket (13).
(g) Remove bolts (14), lockwashers (15), flat washers (16), and wall mounting
brackets (17).
(h) Ensure all shipping brackets (18) are secured with thumbscrews (19) and
remove camera (9) from shelter.
4-40
