TM 5-3610-295-13&P-1
4-13. HISTORICAL FILE CABINET ASSEMBLY. - Continued
a. Inspect. (See Figure 4-2.) - Continued
(3) Inspect drawer handles for breaks and security of mounting.
(4) Inspect label holders for security of installation and damage.
b. Replace. (See Figure 4-2.)
(1)
Remove file cabinet locking bar (1) from cabinet (2).
(2)
Remove drawers (3).
(3)
Remove bolts (4), flat washers (5), backing plates (6), lockwashers (7), and nuts (8).
(4)
Disconnect power cords (9) from light tables (10).
(5)
Remove light tables bolts (11), lockwashers (12), flat washers (13), and rubber legs (14).
(6)
Remove light tables (10) from both sides of cabinet (2).
(7)
Remove screws (15) from both sides of cabinet (2).
(8)
Remove rivets (16) by drilling or chiseling off heads.
(9)
Remove cabinet (2).
(10) Install replacement cabinet (2).
(11) Install rivets (16).
(12) Install screws (15) on both sides of cabinet (2).
(13) Install light tables (10) and rubber legs (14). Secure with flat washers (13), lockwashers (12), and
bolts (11).
(14) Connect power cords (9) to wall receptacle.
(15) Secure cabinet (2) with bolts (4), flat washers (5), backing plates (6), flat washers (5), lockwashers
(7), and nuts (8).
(16) Install drawers (3).
(17) Install locking bar (1) into cabinet (2).
4-24
