TM 5-3610-295-13&P-1
4-12. WALL CABINET ASSEMBLY. - Continued
(1) Replace door handle assembly.
(a) Remove door handle assembly (8) by removing nuts (9) and retainer plate (10).
(b) Remove rods (11) and backing plate (12).
(c) Remove bolts (13), star washers (14) and door handle assembly (8).
(d) Install replacement door handle assembly (8) and secure with star washers (14) and bolts (13).
(e) Install backing plate (12), rods (11), retainer plate (10), and secure with nuts (9).
(2) Remove minor dents and bends from wall cabinet body.
(3) Remove minor dents and bends from wall cabinet shelf.
(4) Repair welds as needed.
(5) Replace handle assemblies if necessary.
4-13. HISTORICAL FILE CABINET ASSEMBLY.
This task covers:
a. Inspect
b. Replace
c.
Repair
INITIAL SETUP
Tools
General mechanics automotive tool kit, Hand blind riveter
Materials
(1) Check historical file cabinet for security of mounting, dents, and structural damage. Inspect welds for breaks
or separation.
(2) Inspect file cabinet locking bar for bends and chipped paint.
4-23