TM 11-7025-210-23
4-65.
REMOVE/REPLACE POWER SUPPLY (XPS) BOARD (CONT)
Replace
1.
Replace and tighten five screws holding XPS
board to power supply.
2.
Replace all connectors on XPS board.
a.
Two white TRANSFORMER wires (non-
polarized).
b.
Two black FAN wires (non- polarized).
c.
Four MOTOR wires. Connect one black
and one yellow wire to rear lead.
Connect two black wires to front lead.
d.
P5 to J5. Six white, two black wires.
e.
P6 to J6. Orange wires.
f.
Linefeed solenoid.
g.
Capacitor leads. One white, one blue.
h.
P3 to J3. 6 white wires.
i.
Ac cable input.
3.
Close up line printer (para 4-18, steps 2-8).
4.
On control panel, press TEST button.
4-162
