TM 11-7025-210-23
4-21. REMOVE/REPLACE MOTHER BOARD
INITIAL SETUP
Common Tools
Materials/Spare Parts
Tool kit
Wire tags
Tie wraps
Pen or pencil
Remove
1.
Remove all bustle boards (para 4-23).
2.
Remove 2 screws (one on each side of cable
connector). Disconnect communication cable.
NOTE
Line printer may be mounted to wall
and floor. If your printer is mounted
this way, see your system manual for
removal procedure.
3.
Pull line printer from wall.
4.
On mother board, find jumper cable in AUX slot.
Note position of upper and lower connectors,
then pull off.
NOTE
Save jumper cable for replacement of
mother board.
4-32
