position A.
b. Press the shutter release button.
c. Move the film advance lever to the right until it
stops.
d. At the same time check to see that the film
rewind knob turns and that the film rewind button
d o e s not turn, the film is not caught in the takeup
s p o o l teeth. Open the case and engage teeth with the
holes in the edges of the film.)
e. T h e f r a m e c o u n t e r ( f i g . 2 - 9 ) m u s t m o v e f r o m
position S to the first dot.
NOTE
The frame counter shows only even-numbered
frames by number (2, 4, 6, etc.); odd-numbered
frames are shown by dots between the numbers.
f. Press the shutter release button again and turn
the film advance lever until it stops. (The frame coun-
ter should now point at 0.)
g. Again press the shutter release button and turn
the film advance lever until it stops. (The frame coun-
ter should now point at the dot between 0 and 2.)
h. Be sure a cap in on the lens.
i. Set the proper ASA film speed by lifting the rim
of the shutter speed dial (fig. 2-9) and turning it until
the correct film speed shows in the window.
j. Set the time lock/shutter lock lever to position L.
