TM-10-3610-202-14 Table 4-1.  Organizational Preventive Maintenance Checks and Services Legend W - Weekly Q - Quarterly A-Annually H - Hours M - Monthly S - Semiannually B - Biennially MI - Miles For Readiness Interval Reporting Item Item To Be Equipment is Not No. W M Q S A B H MI Inspected Procedures Ready/Available If: 9 Safelight - Cont Inspect power cord and switch for proper operation. Inspect safelight bulb for proper operation.  If inspection indicates that repair or replacement of the safelight is necessary, refer to paragraph 4-29. 10 Water Supply Inspect draincock, faucet, Plumbing liner and fittings for damage which could cause leaks.  If inspection indicates that replacement of plumbing components is necessary, refer to paragraph 4-31. 11 Composing Machine Inspect headliner for general Headliner condition and security of mounting.  If inspection indicates that replacement of the headliner is necessary, refer to paragraph 4-33. 12 Phototray Inspect the phototray assembly frame for rust and corrosion and inspect trays for cracks.  If inspection indicates that replacement of phototray components is necessary, refer to para- graph 4-35. 13 Rub Up Board Inspect rub up board for cleanliness or damage. Repair or replace as des- cribed in paragraph 4-37. 14 Sink Shield Inspect the sink shield for security of attachment and general condition.  If inspection indicates that replacement of the sink shield is necessary, refer to paragraph 4-39. 15 Sink Inspect sink for signs of rust or clogging and plug and chain for signs of wear or damage. 4-11