TM 5-3610-295-13&P-2
4-20. WALL MOUNTED STORAGE CABINET.
This task covers:
a. Inspect
b. Replace
c. Repair
INITIAL SETUP
Tools
General mechanics automotive tool kit, Hand blind riveter
Materials
RTV Sealant (3, Appendix E)
a.
Inspect. (See Figure 4-12.)
(1)
Check press wall cabinet for security of mounting. Check for dents and structural damage.
Inspect welds for breaks or separation.
(2)
Check wall cabinet handles for security of installation and damage.
(3)
Check latching mechanism for proper operation and security.
b.
Replace. (See Figure 4-12.)
(1)
Remove contents of wall cabinet (1) shelves.
(2)
Remove bolts (2), flat washers (3), backing plates (4), flat washers (5), lockwashers (6), nuts (7)
and cabinets (1).
(3)
Install wall cabinet (1), secure with bolts (2), flat washers (3), backing plates (4), flat washers (5),
lockwashers (6), and nuts (7). Seal backing plate (4) to shelter wall with RTV sealant (3, Appendix E).
4-37
