TM 5-3610-295-13&P-2
4-24. BLACKOUT WARNING ASSEMBLY. - Continued
b.
Replace. - Continued
(f)
Remove screws (12), lockwashers (13), and flat washers (14).
(g)
Remove housing (15).
(h)
Position switch housing (15) of push button switch on shelter and secure with screws (12),
lockwashers (13), and flat washers (14). Seal to shelter wall with RTV sealant (2, Appendix E).
(i)
Secure switch (11) to housing (15) with screw (10).
(j)
Connect electrical wires (9), secure with nuts (7) and lockwashers (8), and remove tags.
(k)
Position switch cover (5) and gasket (6) on housing and secure with screws (1), flat washers (3),
lockwashers (2), and nuts (4).
(2)
Warning Buzzer.
(a) Remove warning buzzer screws (1, Figure 4-20) and lockwashers (2).
(b) Remove buzzer (3).
(c) Tag and disconnect electrical wires (4).
(d) Remove rivets (5) by drilling or chiseling off heads.
(e) Remove buzzer base (6).
(f) Position buzzer base (6) of warning buzzer on wall and secure with rivets (5).
(g) Connect electrical wires (4) to terminals and remove tags.
(h) Position buzzer (3) on base and secure with screws (1) and lockwashers (2).
4-52
