TM 5-3610-295-13&P-1
4-47.
WALL PARTITION ASSEMBLY. - Continued
a.
Inspect. (See Figures 4-61, 4-62, and 4-63.)
(1)
Inspect darkroom doorway curtain (1) and valance (2, Figure 4-62) for holes and for damage that will
allow light through.
(2)
Check holdback straps (2, Figure 4-61) for damage.
(3)
Inspect curtain hooks (6, Figure 4-62) for freedom of motion through track.
(4)
Check curtain track (5) for secure mounting.
(5)
Inspect wall partition louver assembly (2, Figure 4-63) for bends, holes, and any damage that will
restrict air flow or allow light through.
b.
Repair. Repair of the wall partition assembly consists of removing and replacing components.
(1)
Disconnect holdback strap (2, Figure 4-61) from curtain (1).
(2)
Remove screws (3) and holdback strap (2).
(3)
Remove screws (4), metal strip (5), and curtain (1).
(4)
Remove rivets (1, Figure 4-62) in darkroom doorway.
(5)
Remove valance (2) and valance retaining strip (3) from darkroom doorway.
(6)
Remove screws (4) and carrier (5) from darkroom doorway.
(7)
Remove hooks (6) from darkroom doorway.
(8)
Remove screws (7) and connectors (8) from darkroom doorway.
(9)
Remove rivets (9), hook fastener tapes (10), and metal strips (11).
(10)
Remove screws (12) and threshold (13).
4-139
