TM 5-3610-295-13&P-1
4-44.
COMPOSING TABLE ASSEMBLY.
This task covers:
a.
Inspect
b.
Remove
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
Strap and buckle assembly
a.
Inspect. (See Figure 4-58.)
(1)
Check composing table on darkroom front interior wall for completeness and security of mounting.
(2)
Check composing table for damages or broken or missing components.
b.
Replace. (See Figure 4-58.)
(1)
Unlatch retaining strap (1) from composing table.
(2)
Remove composing table (2) from storage mounting brackets.
NOTE
Remove the following only if necessary:
(3)
Remove screws (3) and fastener loops (4) from wall.
(4)
Remove retaining strap (1) from fastener loops (4).
(5)
Remove screws (5) and lockwashers (6) from mounting brackets (7).
(6)
Remove mounting brackets (7).
(7)
Secure brackets (7) to wall with screws (5) and lockwashers (6).
(8)
Install retaining strap (1) on fastener loops (4) and secure fastener loops (4) to wall with screws (3).
(9)
Install composing table (2) on storage mounting brackets (7).
(10)
Secure composing table with retaining strap (1).
4-133
