TM 5-3610-295-13&P-1
5-13.
RIGID CONDUIT ASSEMBLY. - Continued
b. Repair. - Continued.
(3) Replace Entrance End Fitting. (See Figure 5-9.)
(a) Remove clip (1) from entrance end fitting.
(b) Remove screw (2) and fitting cover (3).
(c) Remove cover (4).
(d) Remove screws (5) and bracket (6).
(e) Remove rivets (7) and channel (8).
(f) Remove rubber grommet (9) and end fitting (10).
(g) Install and secure entrance end fitting channel (8) with rivets (7).
(h) Install and secure end fitting (10) and brackets (6) with screws (5).
(i) Install rubber grommet (9).
(j) Install cover (4) and clip (1).
(k) Install and secure fitting cover (3) with screws (2).
5-23
