TM 5-3610-295-13&P-1
4-48.
STOOL HOLDDOWN ASSEMBLY. - Continued
b.
Replace. (See Figure 4-65.)
(1)
Remove screws (1) and fastener loops (2) from shelter wall.
(2)
Remove strap assembly (3) from fastener loops (2).
(3)
Install replacement strap assembly (3) on fastener loops (2).
(4)
Install and secure fastener loops (2) to shelter wall with screws (1).
4-49. FOLDING CHAIR HOLDDOWN ASSEMBLY.
This task covers:
a. Inspect
b. Remove
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
Strap and buckle assembly
a.
Inspect. (See Figure 4-66.)
(1)
Inspect strap assembly webbing on roadside partition opposite camera for wear, frayed sewing, and
decayed fabric.
(2)
Inspect fastener loops (2) for secure mounting to wall.
b.
Replace. (See Figure 4-66.)
(1)
Remove screws (1) and fastener loops (2) from shelter wall.
(2)
Remove strap assembly (3) from fastener loops (2).
(3)
Install replacement strap assembly (3) on fastener loops (2).
(4)
Install and secure fastener loops (2) to shelter wall with screws (1).
4-146
