TM 5-3610-295-13&P-1
4-27.
VIEWING LIGHT ASSEMBLY. - Continued
b. Replace. - Continued
(15) Remove nuts (4).
(17) Remove nut and switch (6).
(18) Remove screw (7) and nut (8). Tag and disconnect wires.
(19) Remove power cord (9) if necessary.
(20) Install viewing light power cord (9).
(21) Install viewing light screw (7) and nut (8). Connect wires and remove tags.
(22) Install viewing light switch and nut (6).
(23) Install viewing light ballast (5).
(24) Install viewing light nuts (4).
(25) Install viewing light wire nuts (3).
(26) Install viewing light back cover (2) and screws (1).
(27) Install starters (3, Figure 4-29) in socket and rotate clockwise.
(28) Install fluorescent tubes (2) in tube socket and rotate 90
.
(29) Press filter (1) ends slightly and install.
(31) Install mounting strips (14) and screws (13) on wall.
(32) Install bolts (5), lockwashers (6), and flat washers (7) and secure viewing light (1) to wall.
(33) Install viewing light screws (2), lockwashers (3), and cable clamps (4).
(34) Connect power cord to proper receptacle.
4-76