TM 11-7025-210-23
c. Universal Wire Harness Connections. This diagram (fig.
connections between the universal wire harness and the following:
Connector P1 on the LCP/3 board
Connector P2 on the mother board
Connector P3 on the XPS/3 board
Connector P6 on the XPS/3 board
Connector P13 on the bell
Paper out switch
Paper low switch
RUN/LOAD switch
Three grounds
d. Universal Wire Harness Wire and Connector Pin Numbers. This diagram (fig. D-2) provides information for
making a continuity check between the universal wire harness and its various connections.
e. Hammer and Frame Connection Diagram. This diagram (FO-3) provides information on wire connection
between the boards, attached components, and frame grounding wires.
D-2
