TM 11-7025-210-23
4-69. ADJUST VFU ASSEMBLY (CONT)
CAUTION
Do not overtighten adjustment
screw. Make sure detector does not
move while adjustment screw is
being tightened.
9.
Snug adjust screw.
CAUTION
To ensure error-free operation of the
VFU, it is extremely important that
the clearance between linefeed
solenoid arm and clutch lobe be kept
within
specified
tolerances,
preferably at the bottom end of the
range (0.005 inch/0.13 mm).
10.
Check adjustment of linefeed solenoid.
If
necessary, adjust linefeed solenoid (para 4-44,
steps 2-14).
11.
Close up line printer (para 4-18).
12.
Synchronize VFU top-of-form code hole with
paper top of form (TM 11-7025-210-10).
4-174
