TM 11-6780-225-35
b. Cleaning and Inspection.
(3) Install switches (11) with nuts (12) and
retaining nuts (10).
(1) Inspect mechanical components for
(4) Assemble lamp sockets (9) with retaining
cracks, dents, and damaged screw threads.
washers (8), nuts (7), indicator lamps (6), and lamp
(2) Clean all components as requiring using
jewels (5).
cleaning compound and stiff bristle brush.
(5) Install panel (20) with screws (4A).
c. Assembly.
(6) Install connector (3) to box (4).
(1) Install rear plate (15) and rear spiral tube
(7) Install jack (2).
(14) with spacers (12) and (13).
(8) Connect
wiring
according
to
tag
(2) Install front spiral tube (10) and middle
references. Close panel (20) and install screws (1).
plate (11) with attaching parts (2) through (9).
(3) Install spiral tube connector (1).
NOTE
NOTE
The reference designations of the
The reference designations of the
items in figure 3-10 are prefixed by
items in figure 3-9 are prefixed by
A16.
A17A2.
3-22. Refrigerator Repair (fig. 3-11)
3-21.
Film, Print Drier, and Space Heater Control
Panel Repair (fig. 3-10)
WARNING
WARNING
Make certain all electrical power is
Make certain all electrical power has
removed.
been removed.
a. Disassembly.
a. Disassembly.
(1) Remove refrigerator door (2) by removing
(1) Remove screws (1) and open panel (20).
hinge pin (1).
Tag and disconnect wiring as required.
(2) Remove control (4) with screws (3).
(2) Remove jack (2).
(3) Remove compressor and fan unit (8) from
(3) Remove connector (3) from box (4).
refrigerator box (9) with screws (7), nuts (5), and
Remove screws (4A).
washers (6).
(4) Remove lamp jewels (5), indicator lamps
b. Cleaning and Inspection.
(6), nuts (7), retaining washers (8), and lamp sockets (9).
(1) Inspect mechanical components for
(5) Remove retaining nuts (10), switches (11),
cracks, dents, and damaged screw threads.
and nuts (12).
(2) Inspect electrical components for apparent
(6) Remove retaining nut (13), switch (14),
insulation breakdown, loose connections, and possible
and nut (15).
shock hazards.
(7) Remove fuse retainers (16), fuses (17),
(3) Clean all components as required using
nuts (18), fuse holders (19), and panel (20).
cleaning compound and stiff bristle brush.
b. Cleaning and Inspection.
c. Assembly.
(1)
Inspect mechanical components for cracks,
(1) Install compressor and fan unit (8) to
dents, and damaged screw threads.
refrigerator box (9), with screws (7), nuts (5), and
(2) Inspect electrical components for apparent
washers (6).
insulation breakdown, loose connections, and possible
(2) Install control (4) with screws (3).
shock hazards.
(3) Install refrigerator door (2) with hinge pin
(3) Clean all components as required using
(1).
cleaning compound and stiff bristle brush.
c. Assembly.
NOTE
(1)
Assemble fuse holders (19) and nuts (18) to
The reference designations of the
panel (20). Install fuses (17) and fuse retainers (16).
items in figure 3-11 are prefixed by
(2) Install switch (14) with nut (15) and
A10.
retaining nut (13).
3-23.
Partition and Sliding Door Installation Repair
a. Disassembly of Aft Compartment.
(1) Remove aft roadside partition (81) and
3-21
