*TM 11-6720-242-20P
there may be a break in the item number sequence.
by means of its engineering drawings, specifications,
Only illustrations containing organizational authorized
standards, and inspection requirements to identify an
items appear in this manual.
item or range of items.
NOTE
5. How to Locate Repair Parts
When a stock numbered item is
requisitioned,
the
repair
part
a. When National stock number or part number is
received may have a different part
unknown.
number than the part being replaced.
(1) First.
Using the table of contents,
determine the functional group within which the item
e. Federal Supply Code for Manufacturer (FSCM).
belongs.
This is necessary since illustrations are
The FSCM is a 5-digit numeric code listed in SB 708-42
prepared for functional groups and listings are divided
which is used to identify the manufacturer, distributor, or
into the same groups.
Government agency, etc.
(2) Second. Find the illustration covering the
f. Description. Indicates the Federal item name
functional group to which the item belongs.
and, if required, a minimum description to identify the
(3) Third. Identify the item on the illustration
item.
and note the illustration figure and item number of the
g. Unit of Measure (U/M). Indicates the standard
item.
of the basic quantity of the listed item as used in
(4) Fourth. Using the Repair Parts Listing,
performing the actual maintenance function.
This
find the figure and item number noted on the illustration.
measure is expressed by a two-character alphabetical
b. When National stock number or part number is
abbreviation (e.g., ea, in, pr, etc). When the unit of
known.
measure differs from the unit of issue, the lowest unit of
(1) First. Using the Index of National Stock
issue that will satisfy the required units of measure will
Numbers and Part Numbers, find the pertinent National
be requisitioned.
stock number or part number. This index is in NIIN
h. Quantity Incorporated in Unit. Indicates the
sequence followed by a list of part numbers in
quantity of the item used in the breakout shown on the
alphameric sequence, cross-referenced to the
illustration figure, which is prepared for a functional
illustration figure number and item number.
group, subfunctional group, or an assembly.
(2) Second. After finding the figure and item
number, locate the figure and item number in the repair
4. Special Information
parts list.
a. The following publications pertain to the KA-60C
6. Abbreviations
and its components: TM 11-6720-242-12, Camera, Still
Picture KA-60C.
Not applicable.
b. The illustrations in this manual are identical to
those published in TM 11-6720-242-34P. Only those
parts assigned the third position SMR maintenance code
"C" or "O" are listed in the tabular listing; therefore,
(Next printed page is 5)
2
