TM 10-3610-203-14
CHAPTER 7
REPAIR OF TYPE A PAPER STORAGE CABINET
7-1. General
A storage cabinet, type A, located in the forward left corner of the shelter, extends from the floor to the ceiling and is
used to store paper, duplicating supplies and the printing plant vacuum cleaner. Two hinged doors with control arm type
latches provide access to the cabinet interior.
7-2. Type A Paper Storage Cabinet
a.
Inspection. Inspect the type A paper storage cabinet assembly as follows:
(1)
Inspect cabinet for dents or cracks and any other signs of structural damage.
(2)
Inspect welded areas for breaks or separation of weld seams.
(3)
Inspect cabinet handles for security of installation and damage. Repair or replace as necessary.
(4)
Inspect paintwork for any signs of peeling or cracking and check cabinet for evidence of environmental
damage.
(5)
Inspect cabinet assembly for security of mounting. Repair as necessary.
(6)
Inspect shelves for bends, cracks or other damage.
(7)
Inspect latching mechanism and latching rods for freedom of movement, security of installation and signs
of damage. Repair or replace as necessary.
b.
Removal. Remove the type A paper storage cabinet as follows:
(1)
Release the personnel ladder retaining strap and remove ladder from shelter wall.
(2)
Remove the contents from the paper storage cabinet.
(3)
Support the cabinet and remove the bolts, washers and nuts which attach the cabinet rear panel to the
shelter wall mounting points. (See fig. 7-1).
7-1
