TM 5-3610-295-13&P-2
4-21. AIR CONDITIONER ASSEMBLY. - Continued
b.
Replace Air Conditioner. - Continued
Figure 4-15. Air Conditioner Assembly
(9) From inside of shelter cut RTV sealant between air conditioner (1, Figure 4-16) and inner frame (2) (two
layers).
(10)
Remove air conditioner (1) and lower to the ground.
(11)
Remove nuts (3), lockwashers (4), and flat washers (5).
(12)
Cut RTV sealant holding collar (6) to shelter wall and remove collar (6).
(13)
Drill out rivets (7) and pry off handle covers (8).
(14)
Clean RTV sealant from handle covers (8), collar (6), and outer frame (9).
CAUTION
When drilling holes in air conditioner, care MUST be taken not to damage condenser or evaporator
coils or wiring.
4-43