3-3. GENERAL. - Continued
Table 3-1. Operator Troubleshooting
TEST OR INSPECTION
7. DUPLICATING SHEETS STICKING TOGETHER.
Step 1. Check to see if the ink is drying too slowly.
Use proper ink for application.
Step 2. Check to see if the ink is too heavy.
Reduce ink feed-rate setting in accordance with TM 5-3610-298-12&P.
8. POOR SECOND COLOR COPY QUALITY.
Step 1. Check for incorrect color press ink flow or water flow.
Adjust ink flow or water flow in accordance with TM 5-3610-298-12&P.
Step 2. Check for incorrect plate to blanket pressure.
Adjust color press cylinder pressures in accordance with TM 5-3610-298-12&P.
9. PAPERCUTTER KNIFE STOPS IN PAPER STOCK.
Carefully check for burrs on knife cutting edge.
Refer to TM 5-3610-300-12&P for removal and sharpening procedures.