TM 5-3610-295-13&P-2
4-31. LAMP SWITCHES AND WATERPUMP SWITCH ASSEMBLIES.
This task covers:
a. Inspect
b. Replace
c. Repair
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a.
Inspect. (See Figure 4-27.)
(1)
Inspect lamp switches on rear wall of interior shelter for proper operation, loose connections, and
excessive wear.
(2)
Inspect lamp switches cover on rear wall of interior shelter for secure mounting.
b.
Replace. (See Figure 4-27.)
(1)
Set lamp circuit breakers and/or roadside equipment receptacle breaker in main power service box to
OFF.
(2)
Remove lamp switch screw (1) and cover (2).
(3)
Remove lamp switch screws (3).
(4)
Pull switch (6) from switchbox (7).
(5)
Loosen screws (4).
(6)
Tag and disconnect wires (5).
(7)
Remove lamp switch (6).
(8)
Loosen screws (4) on replacement switch.
(9)
Connect wires (5) to replacement switch (6) and tighten screws (4). Remove tags.
(10)
Position switch (6) in box (7).
(11)
Install screws (3) and tighten.
4-70