RIGID CONDUIT ASSEMBLY. - Continued
b. Repair. Repair of the rigid conduit assembly consists of replacing components as follows:
(1) Replace conduit.
DEATH or serious injury could result if electrical precautions are not taken when maintaining this
equipment. Be sure that power cables are disconnected and that circuit breakers are set to OFF.
Be sure that equipment is properly grounded. Always have another person standing by who is
familiar with electrical shock first aid.
Remove conduit as necessary. Complete removal of all conduit is not shown.
(a) Remove conduit bushings (1, Figure 5-5.)
Figure 5-5. Conduit Bushings